SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Windows 7
MSFT 479.20+0.2%Jan 9 9:30 AM EST
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: stock bull who wrote (111)3/26/2010 4:28:19 PM
From: goldworldnet  Read Replies (2) of 152
 
You just lay the motherboard in the case while on its side so your power supply cables reach. Put a couple of screws in the motherboard to protect from shorts on the back of the board. Obviously you have to put in the CPU, but you also have to mount the CPU fan with thermal grease between heatsink and processor or the CPU will overheat in seconds and shut down the computer. For the drive cables to reach you can just use a piece of cardboard resting on the open case edges to set your drives on.

* * *
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News