SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Sioux Nation
DJT 14.32+1.2%Dec 24 12:59 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Travis_Bickle who wrote (190917)5/4/2010 11:09:06 AM
From: Wharf Rat  Read Replies (1) of 361805
 
"if it was a realistic fix they would already have one "

Next time, they will, if they pull these back up when the well is plugged

photo and schematic.
theoildrum.com

Here is some info:
FACT SHEET: SUBSEA OIL RECOVERY SYSTEM

The Subsea Oil Recovery System is a large structure that can be placed over the largest leak source in the Transocean Deepwater Horizon Rig. The system is designed to collect hydrocarbons from the well and pump them to a tanker at the surface, where they will be stored and safely shipped ashore. Weather permitting, deployment of the system is planned within the next six to eight days.
How it works
• The system is made up of a 125-ton, 14’ x 24’ x 40’ structure that will be set on top of the largest leak source. This leak is located at the end of the riser, about 600 feet from the wellhead.
...
• To develop the system, BP quickly located existing structures that had previously been used as coffer dams in shallow water recovery efforts after Hurricane Katrina.

• After Katrina, these structures were lowered over damaged wellheads to allow divers to repair wellheads.

• BP engineers have worked closely with the firm Wild Well Controls, Inc. to convert these structures for use in deep waters.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext