SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Salazar Resources (SRL.V)

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
From: TheSlowLane11/11/2010 7:28:16 AM
   of 191
 
Salazar Expands Thick High Grade Copper and Zinc Rich Zones at El Domo

VANCOUVER, BRITISH COLUMBIA--(Marketwire - Nov. 11, 2010) - Salazar Resources Ltd. (TSX VENTURE:SRL - News; FRANKFURT:CCG - News) - Mr. Fredy Salazar, President and CEO, is pleased to announce the latest assay results from drilling at the El Domo deposit in the Las Naves Central area of its Curipamba Volcanic Hosted Massive Sulphide Project in Ecuador.

The Company is pleased to announce results from the El Domo drill program for diamond drill holes (DDH) Curi-10-73 and Curi-10-74 located in the northern part of the deposit (to see Figure 1, please click here: media3.marketwire.com where thick zones of high grade mineralization were encountered including:


-- Curi-10-73 intersected 16.65 meters at 1.1 g/t gold, 27.9 g/t silver, 2.07% copper and 0.64 % zinc
-- Curi-10-74 intersected 3.11 meters at 5.4 g/t gold, 40.0 g/t silver, 0.67 % copper and 6.79 % Zinc

"These two holes pierce thick sections of the deposit west of DDH 60 where an intersection of more than 30 m of high grade was previously reported and continue to expand the northern end of the deposit," says Fredy Salazar, President and CEO. "Continuity of mineralization in the north-south direction at El Domo has now reached approximately 650 m and drilling will continue to delineate the deposit in all directions. Our confidence in the economic potential of this deposit grows with each new drill hole."

Curi-10-73 was drilled at 90 degrees strike on section 5450 N with -70 degree dip and a length of 161.9 m. Curi-10-74 was drilled 270 degrees strike on section 5450 N with -85 degree dip and a length of 150.0 m. The following table provides a summary of the significant intersections of each drill hole:

---------------------------------------------------------------------------
Hole From To Width Gold Ag Cu Pb Zn
# (m) (m) (m) (g/t) (g/t) (%) (%) (%)
---------------------------------------------------------------------------
CURI-73 94.86 111.51 16.65 1.1 27.9 2.07 0.13 0.64
including 94.86 101.00 6.14 1.3 56.1 0.11 0.31 1.24
and 105.65 111.51 5.86 1.3 15.4 5.55 0.02 0.43
---------------------------------------------------------------------------
CURI-74 87.82 96.56 8.74 2.9 26.5 0.44 0.24 2.85
including 91.20 94.31 3.11 5.4 40.0 0.67 0.48 6.79
and 108.09 114.00 5.91 0.7 12.8 0.32 0.13 1.28
---------------------------------------------------------------------------
(i)widths reported are not true width

The above information has been prepared under the supervision of Tom Healy P.Eng. who is designated as a Qualified Person as defined by NI-43-101 with the ability and authority to verify the authenticity and validity of the data.

A QC program was used whereby 5% of all samples sent to the laboratory were standard samples with known silver and gold values. Sample preparation was performed by BSI Inspectorate Quito, Ecuador, using standard industry practices (sample prep minus 32). Analytical work was carried out at the BSI Inspectorate Laboratory in Lima, Peru, using fire assay methods for gold (Au-25 procedure). Standard samples, blanks and duplicate check samples were randomly inserted to the sample batch to ensure quality control.

ON BEHALF OF THE BOARD OF SALAZAR RESOURCES LIMITED

Fredy Salazar, President & CEO

Salazar Resources Limited

finance.yahoo.com

Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext