SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Plastics to Oil - Pyrolysis and Secret Catalysts and Alterna
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
From: flptrnkng2/10/2011 4:28:07 PM
Read Replies (3) of 53574
 
Justice37 is flat out wrong about the heat source.

NYS law and the draft permit require mixing of the off-gas with natural gas to form the heating fuel.

This permit authorizes the following regulated processes for the cited Emission Unit:

Emission Unit: 3-P2OIL
Process: GB1
Process Description:
In the Gas Burner Process byproduct uncondensed gases from the reactor, which consist of low molecular weight compounds, are mixed with normal natural gas and fed to a burner to supply the heat for the reactor in the Plastic2 oil process P01.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2026 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News