SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Tenchusatsu who wrote (612976)5/26/2011 8:24:06 PM
From: combjelly  Read Replies (2) of 1577822
 
"You don't have to rotate radials?"

What for? You had to rotate bias ply tires because if you left them on the same side the plies would set and increase tire wear. But if you do that with radial tires, the belts will break and the tires blow out. Now some tire places will tell you to rotate them from to rear. But the only reason to do that is so you can buy 4 tires when they wear out. Better to just change out the two driven tires and leave the others alone. It doesn't decrease the wear rate, it just cost you for labor.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News