SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: i-node who wrote (625491)8/22/2011 3:26:15 PM
From: bentway  Read Replies (1) of 1578269
 
Read what they DO, Dave! Basically, rebuild the engine into a NEW engine. Gasoline conversions are a very simple modification in comparison.

"Conversion Steps
1- Disassemble engine.
2- Checking components and replace as necessary.
3- Modify pistons for gas use (lower compression ratio).
5- Modify cylinder head for spark plugs.
6- Install camshaft sensor and timing wheel.
7- Reassemble engine.
8- Install throttle body, ignition system, gas mixer or fuel injectors.
9- Tuning of the engine (fuel and ignition)."
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News