SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Audio/Video Gearhead Thread
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: HerbVic who wrote (150)10/25/2011 5:05:47 PM
From: Cogito  Read Replies (1) of 172
 
>>OK, so the Velodyne SP-1200 does not output to the satellite speakers? You do need a separate amp to power the L and R channels. That's where I was getting confused. I think the cheaper, lower powered, 6" Velodyne sub had speaker level outputs and that's where I expected the rest to be as well. Thanks Allen.<<

The lower-end subs have speaker level outputs, but they only act as a pass-through from an external amp. The signal passes through the sub's crossover, and everything above the subwoofer's range is routed to the speaker outputs. Note that these speaker outputs only work if you connect the sub to your main amp using the speaker-level inputs.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News