SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : GOLDEN PHOENIX MINERALS, GPXM
GPXM 0.000001000-99.0%May 28 1:24 PM EDT

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: jrzy who wrote (790)11/21/2011 6:57:50 PM
From: PayShhhhence   of 811
 
Drill holes presented in Table 1 were collared over a spacing of 300 to 600 meters (1,000 to 2,000 feet) northwest from the historical Brodie pit. Drill hole MR11252, which intersected 24.39 meters averaging 5.19 g/t gold, was the furthest hole drilled to the northwest."

LENGTH would be the distance between holes - infill drilling adds additional holes CLOSER to the original holes - think of it as DPI for a picture.

All holes presented in the above tables were completed by reverse circulation (RC) drilling. True width is estimated at ~90% downhole width.

The width as far as I can tell refers to the width of the mineralization....

Reverse circulation (RC) drilling doesn't have a core - it has sample bags that represent a certain depth - I believe it's 5 ft per sample bag .

SO hole MR11252 looks like it was 495 feet deep......... from a depth of 415 ft to 495 (80ft) 0r 24.39 meters the grading of the samples (16 samples) averaged 5.19 g/t gold.

That's apparently a fairly THICK band of mineralization....

There were OTHER holes with better grades but not the WIDTH.

The SAME hole also had 13 meters of 8.87 G/t.....

YOU CAN BET THEY'LL BE DOING SOME INFILL DRILLS AROUND THAT HOLE.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext