Any info about Iomega (IOM)? Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Non-Tech : Any info about Iomega (IOM)?

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Brendan2012 who wrote (36735)	11/20/1997 7:27:00 PM
From: Troy Shaw	Read Replies (3) of 58324

Brendan, The connector Iomega sent you was to be used to connect either a Jaz to a Zip, or a Jaz to a Mac. You can use the connector in your system like this: The Jaz Jet female-50HD connector should be connected to one end of a male-50HD-to-male-50HD SCSI cable. The other end should be connected to the female-50HD-to-male-25 adapter (you received from Iomega), which you plug into the Zip plus. In other words, you could solve your problem using the adapter from Iomega with a 50HD SCSI cable (also available from Iomega.) <<50-pin to 25-pin. Of course, when I got it I found out that it was 50-pin but it was some larger connection.>> Didn't you already have one of these? Iomega shipped one with all of the SCSI Zips. That connector is supplied for attaching the Zip to a SCSI 1 card, which often used a low density 50 pin connector. By the way, Iomega did not intend for the Jaz Jet to be used for the Zip without a Jaz connected to it first. That is why you are having a problem finding the adapter you want -- I don't even know if such an animal exists. That's why you're having a difficult time.

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next