Any info about Iomega (IOM)? Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Non-Tech : Any info about Iomega (IOM)?

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Brendan2012 who wrote (36735)	11/20/1997 11:19:00 PM
From: BeachBum	Read Replies (1) of 58324

Brendan, I just went through the same thing this weekend. I was going to hook it up as parallel port ( why I don't know ), luckily my scanner had a problem IDing my ZIP+ if I went through the pass through. I plugged it straight to the printer port and it worked OK so I knew it was the scanner. I went to Micro Center and ended up in the Mac department and bought a 50 pin SCIS ribbon cable that went to a 25 pin MAC SCSI (parallel port on PC) connector mounted on a slot cover that screws into the bezel. Take your cover off your PC attach the 50 pin ribbon cable to your JAZ JET controller, mount the slot cover with the 25 pin connector put the cover back on and your ready to fly. I'm glad my scanner didn't like my Zip+ because now its running as a SCSI device. Hope this helps, thats the 1st MAC product I ever bought. The salesman in the PC dept said most of the SCSI stuff was in the MAC dept. Bill

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next