SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Computer Learning
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Ken Adams who wrote (88482)4/27/2015 9:24:44 AM
From: Reseller Mike4 Recommendations

Recommended By
goldworldnet
Gottfried
SI Ron (Crazy Music Man)
SteveinTX

  Read Replies (2) of 110624
 
WD-40 is the worst thing to use. It is not a lubricant, it is a penetrant It will only attract more dust and then it becomes a mess. Fans in PC's a not something to be applying lubricants to. They are either sealed ball bearing or a brass sleeve bearing (typical). They wear out. Easiest solution is to replace it. Check the size, plug type and order a $10 fan on Amazon or ebay and change it yourself. Usually 4 screws and a plug.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News