Formerly About Advanced Micro Devices Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Petz who wrote (27035)	12/21/1997 10:54:00 AM
From: Maxwell	Read Replies (5) of 1574168

Thank you everyone for your valuable information on the motherboard. I just bought a K6-233 for $219. I will design a water cooling system or a giant copper block to cool down the chip. This happens to be my expertise, heat transfer. I want to cool it down enough so I can crank up the chip to 333MHz using 83MHz bus speed at 4x multiplier. Does anyone know whether the K6 supports the multiplier beyond 3.5X, says 4, 4.5, or 5X? I will use 64MB SDRAM for memory, an IDE hard drive. I am not sure about a video card. Any sugestions out there? Does it make a big difference in performance? John I heard that the Shuutle 603 is unstable when running at 83MHz. At 75MHz it is OK. I will do and publish performance testing when I get it up and running. Also I looked into some of these motherboards as a few has suggested. The problem is that not all boards support multipliers beyond 3.5X. Maxwell

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next