Cyrix 1 / NSM 1 where hardware goes Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Cyrix 1 / NSM 1 where hardware goes

CYRX 9.230

+2.6%

Oct 31 9:30 AM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Bill Rau who wrote (239)	1/23/1998 9:59:00 PM
From: Mark A. Forte	Read Replies (1) of 300

Board setup with P166 Try a 2.5X60mhz overclock. This will make your cpu run like a P200. From my recent experience it is best to stay away from 2x75 with sdram. The overclock above is only around 10% so it will probably be stable. Until you know the setup is stable rem out smartdrive in autoexec.bat. If you're using Win95 and the system locks up try a control alt del to stop the task. If no response reset. It's possible your system will come up in safe mode. If you're not prepared to make jumper changes to change the overclock I would have the guy who sets up test the system for at least 4hrs. You will get a 12 - 15% speed increase from the overclock so if system integrity is important don't join the speed phreaks like us.

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next