Unitec Int. Controls Inc. Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : Unitec Int. Controls Inc.

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: csm who wrote (82)	1/29/1998 8:05:00 PM
From: John B. Smyth	Read Replies (1) of 856

Following up on the Y2K (Year 2000) question Stuart, we have completed several tests, and have a few more to go. The results: Our MTU (Master Station) graphical interface "Unitec Gold" rolls over without problem for the real-time data collection, display and alarming functions. We will be testing the historical trending to insure it catches the roll over as well. I see no reason for it not to at this point, but need to run several independent tests with all of the systems that we have installed to make sure. Our UIC (remote industrial computer/RTU/PLC) however does not roll over. While we use four digits, only the last two roll over automatically. We need to reset the first two digits using the configuration manager (software that we provide to allow customizing of the communications, input and output parameters). This can be performed from the MTU or in the field. I think we might write a small module to do it automatically from the MTUs during the polling and synchronizing cycles. I will keep you appraised of the other test results. Regards, John

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next