ajtj's Post-Lobotomy Market Charts and Thoughts Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Strategies & Market Trends : ajtj's Post-Lobotomy Market Charts and Thoughts

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: ajtj99 who wrote (45418)	12/1/2021 9:57:42 PM
From: Sun Tzu	Read Replies (1) of 97877

I don't know how experienced you are with chainsaw, so I recommend that you watch a couple of videos if you have not done this exact kind of work before. You'd want to cut a wedge or U in the side that you want it to fall. This should be about 1/3 to 40% in. Then you will cut from the opposite side coming into the wedge from behind. This is true even if the tree has fallen on the fence and you just want to cut it to pieces. Otherwise the tree will fall on your saw and/or jam it. Seems kind of obvious, but you'd be surprise how many people just cut from one side and keep going.

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next