SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Micron Only Forum
MU 230.24+2.5%Nov 26 3:59 PM EST
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: FJB who wrote (28039)2/8/1998 8:25:00 PM
From: DavidG  Read Replies (4) of 53903
 
Robert,

I disagree. My personal experience is that you need the highest quality SDRAM
to operate at higher bus speeds. 12ns SDRAM will probably not work on a
100MHz bus.

That is why I qualified the memory manufacturers like Korea. Because they are dumping and also their quality control is probably being sacrificed.

100mhz boards were tested already with -12 and worked fine... but remember Larry's question was 100MHZ memory and that will definiterly work fine in the 440BX chipset.

A side note, Micron is known to design to better specs, and their 60 nanosecond memory easily operates down to 50 nanoseconds with no problems. I have tested many brands of Memory and found Micron to be the most reliable and to run at higher bus speeds. Korean memory is garbage, even at the 66MHZ speeds.

So it really depends on the manufacturer and the specs that they design to.

DavidG
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News