SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
Recommended by:
Bill
longz
To: Eric who wrote (1427011)12/4/2023 3:11:04 PM
From: Tenchusatsu2 Recommendations   of 1572635
 
Eric,
I ripped out the electric forced air furnace in the house I bought in 2006 and installed a 55,000 BTU (5 ton) heat pump (air conditioner) myself. Brand new, $2,500 for the outside pump and indoor ECM air handler.
I paid $8,000 for a new A/C in my house about 6 years ago. Of course, I had professionals install it for me.

It would have cost somewhere near $10-$12K had I gone with a heat pump, but at least I would then be able to get rid of the gas furnace.
Sounds like you have never worked in HVAC.
Obviously not. Neither has most people.

So yeah, heat pumps are indeed expensive to buy and install. Few people have the experience to install these things themselves. Even the "professionals" who are hired by the heat pump vendors sometimes don't have enough expertise themselves.

My A/C installers, for example, made a mistake that caused the A/C to not work properly. Turns out, one of the insulation sheets got sucked into the main vent and blocked the cooling coils. It was easy enough for an A/C repair guy to fix, but it got me thinking about what other "small mistakes" the original installers made. (So far, none have been found, lucky for me.)

Tenchusatsu
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext