SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Paul Engel who wrote (28699)2/24/1998 2:36:00 AM
From: Petz  Read Replies (2) of 1572645
 
Petz - Re: " Based on these sizes, the K6's in 0.25 micron are much more "manufacturable."

Paul: What brilliant logic.

I suppose if they were designed to be 34 sq. mm they would be REALLY
MANUFACTURABLE.

FYI, AMD indicated in the January conference call that the gist of the remaining yield problem on the 0.35 K6 was simply defects. (There was also a speed bin problem but that was solved, which is obvious from the small spread in prices between 200 and 233 MHz and non-existence of the 166 speed.) Now I assume you had some statistics in college. If you did, you know that increased die size increases the probability of a bad chip EXPONENTIALLY if wafer defects or defects added during processing are the primary problem.

Petz
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News