SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Disk Drive Sector Discussion Forum
WDC 163.33+3.5%Nov 28 9:30 AM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Stitch who wrote (2541)2/24/1998 3:46:00 PM
From: Mark Oliver  Read Replies (2) of 9256
 
<With Thin Film Inductive heads, you are correct, that for a read/write functional test, they had to wait until the slider was assembled into a full HGA before it could be mounted on a spin stand and passed over a reference surface (media with known magnetic characteristics) for a read/write function to test it. >

So, the issue of wasted suspensions is decreasing with MR heads. Therefore, it would seem that demand for Hutchinson would fall, assuming these suspensions were trashed when TFI heads failed. Then you look at falling platter count and it would seem that the whole MR transition is going to be difficult for suspension makers. Does this make sense?

Regards,

Mark
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext