SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Strategies & Market Trends : Ride the Tiger with CD
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
From: ogi9/8/2025 7:14:33 AM
   of 312593
 
Excerpt:

Vancouver, British Columbia – TheNewswire - September 8, 2025 – Rackla Metals Inc. (TSX-V: RAK) (the “Company”) is pleased to announce that the Company has completed the 2025 drill program at the BiTe showing on the Grad Property. Additionally, the Company reports that it has made a new discovery from surface sampling on the Manta intrusion, 2 km south of the BiTe showing.

Rackla has also been informed by the lab that results from the first three drill holes will not be completed until after the 21st of September.

  • The final two drill holes (G25-009 and 010) were drilled on the southern margin of the intrusion and encountered impressive alteration zones and abundant sheeted veining.

  • Sheeted veining and bismuth-sulphide/telluride(?) mineralization has been observed in all holes drilled in the program.

  • Core samples from all holes have been delivered to the lab and the Company still awaits the analytical results.

  • The first rock samples collected in the vicinity of the Manta intrusive have returned several multi-gram gold results associated with sheeted veining and bismuth mineralization.

The drill program at the BiTe showing was completed on September 4 and the drill crew has demobilized for the season. In 2025, 10 holes were completed for a total of 4,486 m. The drill program tested an area measuring 600 x 360 x 550 m.

The area tested has demonstrated a consistent set of sheeted quartz/sulphide+tourmaline veins with 3 dominant vein orientations (Figure 1). A broad zone with intense quartz and quartz-tourmaline veining and elevated bismuth content was intersected at the top of holes G25-004 and 005. This zone has been intersected in holes G25-006, G25-007, G25-009 and G25-010. The zone shows good continuity and appears robust with increasing strength and width as the intercepts get deeper.

Sampling ofquartz-arsenopyrite veins on the ridge top and high on the north face of the intrusive have returned low gold values. Little work has been done below the upper most reaches of this face. Sampling on the west and east ridges has observed quartz veining with bismuth sulfides/tellurides. Results from this sampling are pending.

2026 will see a focus of drilling from the ridge top, testing the core of the Grad intrusive. Several areas have been identified where pads can be established. The Company had planned to drill this area from Pad E in 2025, however determined to delay this hole until 2026 due to inclement weather and the related safety hazards.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News