SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Intel Corporation (INTC)
INTC 41.41+2.2%3:59 PM EST
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Thomas M. who wrote (49731)3/5/1998 1:56:00 PM
From: Petz  Read Replies (1) of 186894
 
With idiotic comments like the following from Micro Design Resources, Intel still has room to fall:

Intel also stands to benefit this year from a broad production shift to factories producing circuitry at 0.25 microns from those using 0.35 micron tools. That change alone could cut manufacturing costs by 60% by year end, according to Micro Design Resources. That would moderate the gross margin problem.

The 60% estimate is totally WACKO, because the Intel die sizes are only reducing by 40% or less, the production process for the 0.25 chips is more lengthy (5 layers instead of 4), and the production process is less mature, so yields will be lower.

fnews.yahoo.com
(the original source of the 60% baloney was apparently Micro Design Resources)

Petz
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News