SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Technology Stocks : Intel Corporation (INTC)
INTC 34.32-1.2%Nov 18 3:59 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Paul Engel who wrote (55799)5/19/1998 3:38:00 PM
From: Yousef  Read Replies (2) of 186894
 
Paul,

Re: "Yousef - Here is another 0.25 micron/266 MHz Technology to analyze from IDTI."

I went to the Winchip web page and look what I found -->

winchip.com

"The IDT WinChip 2 and WinChip 2 3D will be produced using both 0.35 and
0.25-micron process technology, which enables high-volume manufacturing of
processors to supply a broader base of users. IDT is an industry leader in
0.25-micron process technology and will be producing all of its IDT WinChip
microprocessors using this process by the end of 1998.

To meet demand, IDT is ramping 8-inch wafer production at its Oregon facility
and has signed a foundry agreement with IBM, who will use its 0. 25-micron,
2.5-volt IBM Blue LogicT technology to manufacture IDT WinChip 2
microprocessors."


The answer is that IDT is using an IBM .25um process that has a 2.5V
operating supply voltage. This means that the gate oxide is thicker, gate
lengths are longer and performance is lower as compared to Intel's .25um
process (which runs at 1.8V). This is NOT IBM's most advanced ASIC process ... but
I guess that this is all IDT can afford. <ggg> BTW, this IBM process is
more comparable to Intel's .35um process in performance.

Make It So,
Yousef

Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext