SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Gold/Mining/Energy : Golden Eagle Int. (MYNG)
MYNG 0.0700+5.7%Feb 21 4:00 PM EST

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Diamond Daze who wrote (3905)5/30/1998 8:47:00 PM
From: Don Rohner  Read Replies (1) of 34075
 
Chris:
Here again for the hundredth time is the quote:

"This calculation, on the basis of the sampling program reported in this report, will have to be increased by approximately 28 times, for an average grade of 14.049 g/m3 of gold."

Also if you read through all the assays the total combination shows up consistantly at about 14 g/cum on aver.

Sorry but the grade because of the fine gold and gold within the rock are so much higher than the coarse gold give a total grade of 14 gm/cumeter. Where are you geting 1.4g/cumeter?????
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext