SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Microcap & Penny Stocks : EVDS Environmental Digital Services, Inc.

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Jeffrey L. Henken who wrote (41)9/15/1998 10:59:00 AM
From: ColleenB  Read Replies (3) of 718
 
>>>Don't the nozzles used to fill these tanks have sensors like we find at the local gas station anyway? <<<

I can honestly say that the last time I saw a tanker filling the UST's at a station I never thought to check. My guess is that this would be a simple solution to the filling of a tank, and without over flow...however, the CAPSCAN's use is more for daily use. The owner of a station is supposed to record every time any amount of fuel is tapped from the tank. This information is then subtracted from the amount at fill up and the remainder should be what's left in the tank. So, ideally, the next fill up should be less the amount in the tank and if it turns out to be more, then you potentially have an underground problem. Where the CAPSCAN would be useful is in more accurate readings and thus a more rapid identification of a problem, less clean up and contamination will occur. Some (many) tanks leaked for years before they were replaced and these are quite problematic and costly when trying to detoxify the area. And if the contaminants hit the water table, it can take years of monitoring and bailing of products, even after excavation. So the CAPSCAN would be quite advantageous for the station owners.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext