SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC )

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Zeuspaul who wrote (2689)9/27/1998 8:06:00 PM
From: Howard R. Hansen  Read Replies (3) of 14778
 
Motherboard bios must support drive boot selection

This option is available on most new motherboards. One can find the info in the mobo manual or by accessing the bios. The methodology for accessing bios varies. On my computer I push *DEL* shortly after the initiation of the boot sequence. This is operating system independent as it occurs before the OS starts loading.

One will see a list of bootable devices once the bios page has loaded. It will vary depending on the bios. One can select the order of the devices. Most default sequences start with the A drive..then CDROM..then the primary harddrive. One only need alter the the primary harddrive selection. The bios in my machine has an option for each of 4 possible harddrive selections. The primary and secondary drives on each of two channels on the IDE controller.


Has anybody else had trouble with a primary partition on hard disk drive one no longer being set as an active partition after using the BIOS to boot from a second hard drive? I ran into this problem with an Asus's motherboard. It meant I had to run Fdisk to make the primary partition on drive one active in addition to selecting which drive to boot from with the BIOS to be able to go back and boot from drive one.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext