Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Clarence Dodge who wrote (2802)	10/12/1998 12:59:00 PM
From: Zeuspaul	Read Replies (4) of 14778

>>Thanksgiving I'll be OK. I would obviously be very interested in hearing how your KOT setup runs under NT.<< How 'bout Christmas? My first attempt was a failure. I used Partition Magic to format a FAT partition at the beginning of one of my SCSI drives. I then unplugged all of my other harddrives except the prepared SCSI drive. I set the mobo bios to SCSI and the SCSI bios to the boot target ID of the prepared SCSI drive. I do not think the problem is with any of the above. I booted the machine with the NT disc in the IDE CDROM. It looked at my hardware and loaded some drivers. The only mass storage device it found was the IDE CDROM. NT asked me if I had any other devices not shown on the list for which I had a disc supplied by the manufacturer. I chose to continue and NT said it could not as there was no harddrive to install itself on. I believe I need to load a driver for the IBM SCSI harddrive or the Adaptec AHA 2940 U2W SCSI host adapter or both. Anyone have any ideas? Zeuspaul

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next