Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Gravitar who wrote (914)	10/14/1998 1:42:00 PM
From: M CAHILL	Read Replies (1) of 14778

Having similar problems getting the AGP card (ATI Rage LT Pro) to work in the Compaq 5635 along with another PCI card (Creative Banshee). The AGP card works fine when installed by itself. After installing a PCI card, the the system boots up on the monitor attached to the PCI card and an message is displayed on the original monitor attached to the AGP card saying to adjust settings. The system device manager has the original AGP card tagged and suggests removal of memory management in Config.sys. Tried suggestions such as this and at support.atitech.ca The second monitor icon never appears. Was hoping it would be plug and plug. Perhaps the Compaq enhanced drivers don't support multi-monitors. Do not see drivers avaliable for the ATI Rage LT Pro at ATIs website. Maybe the LT means Limited. Tried another driver that is supported the monitor worked but it still did not get the other monitor working. Any suggestions? Any one have a plug and play experience with 1 PCI card and 1 AGP card?

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next