Formerly About Advanced Micro Devices Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Elmer who wrote (41078)	11/8/1998 10:12:00 PM
From: Maxwell	Read Replies (3) of 1574004

Elmer: <<Well if the PII cost is only $6 higher than the Celeron and it has the added cost of SRAM, tag ram and a more expensive card with all the resistors and such, the yield must be just as bad to make the die cost roughly equal to the Celeron, don't you think? And even with a much smaller die!!! Test costs must also be significantly higher for the PII with a much greater pincount and backside bus needing testing at a much higher speed than the Celeron. Multiple socketings needed both on and then on the card. All this and only $6 higher! Those guts at MPR must really know what they're talking about thiugh...>> Yes. You are right. Testing on the PII is a little longer than the CeleronA. Die size wise silicon of CeleronA is more expensive than PII silicon. Daughtercard of both CeleronA and PII are about the same. Both cards have plenty of surface mount resistors. PII have better looking casing. 4.5ns 512K SRAM is dirt cheap. MR estimates are as good as any one. $6 difference is about right. Maxwell

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next