SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC )

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: jw who wrote (3778)11/29/1998 11:44:00 AM
From: Howard R. Hansen  Read Replies (1) of 14778
 
Think a person would be buying a pig-n-poke?. Just thinking out loud.

No. But I hope you understand the limitations of this motherboard. The Tyan S1692S Tiger ATX Pentium 11 motherboard uses the Intel LX chip set. This means it is limited to a maximum front side bus speed of 66Mhz. Newer motherboards use the Intel BX chip set and can run with a front side bus speed of 100MHz. Maybe it was a mistake but I couldn't find a COM, serial, port in its port listing. I would never buy a motherboard that didn't have a built in COM port. As far as I know you can not use a Celeron CPU with this motherboard as this capability must be built into the BIOS.

At one time the Tyan S1692S Tiger ATX Pentium 11 was a leading edge motherboard. But you can buy an ABIT BH6 motherboard and a Celeron CPU for about the same price as you can purchase a Tyan S1692S Tiger ATX Pentium 11 motherboard and Pentium II CPU and end up with a computer with better performance when you over clock a Celeron 300A to 450MHz.

Conclusion if you already own a Pentium II CPU than buying a Tyan S1692S Tiger ATX Pentium 11 motherboard is a safe choice but if you also need to buy a CPU than I suggest you purchase a motherboard that uses Intel's BX chip set.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext