Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: doniam who wrote (4008)	12/11/1998 1:28:00 AM
From: Zeuspaul	Read Replies (1) of 14778

OK, your in a rush...I'll do the best I can Minotaur is the current assembler of choice so the component considerations are with his inventory in mind. ( His site is sure slow tonight..I hope we do not have another victim of success. Celeron 300a overclocked to 450 128 ram (100 sdram) Should I pay up for Corsair or other? ABIT BH6 motherboard This is the combo to get. Even if you choose to not overclock the machine will be snappy and will upgrade to a 450+ CPU.. Using Minotaur as a guide go for the Corsair ram IMO. If I had my choice it would be Samsung. The ABIT BH6 has good Internet support..kinda safety in numbers and universal support here. $515 10.1GB IBM Deskstar ATA-3 at 7200 Or the 8+/- model? 8 GB and 5400 RPM should be enough. With 128 MB ram you will not swap to the harddrive very often. It will boot a little slower. It will take you awhile to fill 8 GB. Add another drive later if you need it. $221 Video Card Maxtor Mistique G200 or ??? <b<MATROX Millenium II AGP 8 MB ( his site shows the Mystique backordered. Matrox has a good reputation for driver updates. ATI is an alternative. $132 Sound card ??? something cheap as I won't be into 3D Ensonique $29 Case and cooling enough for the overclocking heat In Win Q500a Full tower with 300 watt PS $94 US Robotics Internal Sportster V 90 56K $129 Verify your ISP uses V90 technology Standard floppy, 32x CD, internal ZIP drive. floppy $19 Toshiba 32X $59 ( too many posts, wasn't it you that agreed to pass on the zip?) use my old mouse and keyboard $0..I like the scroll on the new mice, it is great for surfing. Win 98 $95 $1293 +30? assembly total $1323 + ship and tax check my arithmetic I can't help much with the monitors. The $600 21 in refurbs sound good but you have to find them. I have Viewsonic and NEC monitors and like them both. Go for 21 in if you can afford it and have the space. You might find a good deal on a Viewsonic G10 21 in. Zeuspaul BTW, if you are using the screw driver as a pry tool or to drive screws you hold the large end. If you are using it as a hammer to tap things you hold the thin shiny end. <g>

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next