Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Clarence Dodge who wrote (4435)	12/27/1998 11:52:00 AM
From: Spots	Read Replies (1) of 14778

ZP is too conservative on this one. By all means rejumper the disks so NT is the master and W98 the slave. You should get a disk spec/instruction sheet in the package; just look up the jumper settings. You do have the two drives on the same controller, right? In that big case you shouldn't have to dismount anything. If they're on different controllers, just swap the cables. The bios should display where it finds the disks during POST if you can't make it out otherwise. Also in the disk setup in BIOS setup. Don't know what he means about drivers. You should be running NT service pack 4 to get the latest fixes for big disks and DMA access. Spots

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next