Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Zeuspaul who wrote (4384)	1/3/1999 2:50:00 PM
From: Clarence Dodge	Read Replies (3) of 14778

ZP After a series of unavoided distractions I'm trying to get back to BigBoy's sw setups. All i've done so far is get some trackball sw working and install Aopens Hardware Monitor on the w98 drive since its setup would not open in NT. I mentioned cpu running a cool 77 deg F but 0 rpm reading for the cpu fan althought I visually confirmed its running OK. The cpu fan wiring is connected to the mb ok. I do not know why a reading is not being transmitted. Hardware Monitor reads one of the case fans (not sure which one) without problem but not the cpu fan. Direct Image install My preference is to keep everything on one partition and add a second partition if there is a good reason. The DI manual indicates an installation to WinNT must be in a FAT partition. My primary master drive with NT is now one big 6.4 g NTFS partition (if no partitions= 1 partition). Does this qualify as reason enough to create a second parition formatted FAT 32? The primary slave with w98 is already formatted FAT 32 so I'm going to go ahead with a DI install on this drive first. Clarence

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next