SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Cirruslvr who wrote (45264)1/10/1999 11:47:00 AM
From: Paul Engel  Read Replies (3) of 1580154
 
Cringe - re: "K6-2 450 and K6-3 will require 2.3 volts."

There they go again - their process can't produce 450 MHz at the nominal Vcc so they have to JACK UP THE VOLTAGE.

That's a 9% power increase over the 2.2 volt part at the same frequency.

However, since 450 MHz is 12.5% above 400 MHz, that adds up to a total of 21.5% POWER INCREASE for 450 MHz K6-2.

I hope the PC OEM's can handle that excess heat generation.

Paul
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News