SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Linux OS.: Technical questions
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Charles Hughes who wrote (153)1/14/1999 7:41:00 AM
From: E. Charters   of 484
 
You shouldn't need to set up your modem. Most will recognize the Hayes command set which chat and DIP scripts use. All you need to do is send the appropriate sequences in your modem in the script to set it. If resetting is done in the script then you may have to comment that out. For a USR the command AT&F1 will set it to factory settings. Then the command ATZ0 (0 is #0) will get its attention. Then ATDT followed by the dial up string (phone number and return) is all you need. Tale a look a this script. ( If you read a manual or HOWTO and set up your system for loopback (dial up network access) with netconfig by just typing netconfig at the prompt and folowing directions, everything should work.)
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News