Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Zeuspaul who wrote (5404)	1/21/1999 11:34:00 AM
From: Spots	Read Replies (1) of 14778

>> Dead CD Sorry, ZP, you may have tried this, but just in case. BIOSes vary in their reflection of CD roms. In my house it's about 50-50 whether the bios acknowledges a CD or not, even when properly installed. If you haven't actually tried the DRIVE in those various jumper configurations, you haven't ruled out one of them working. I seem to recall that you did try the drive in one of the early configurations, but what about the variations? This is Win 95, right? If there isn't a win95 driver you can use a dos driver, but you may have to load it in config.sys along with MSCDEX in autoexec.bat and all that drill. One last thing. On the Intel web page somewhere is an update for the Win 95 config tables for chipsets that came out after Win 95. Win 95 has trouble recognizing the IDE ports as presented by the later chipsets, which will prevent Win 95 from detecting the CD and loading the virtual driver for it. Ok, here's the last thing <g>. Build a DOS bootable floppy with the driver and mscdex configured to access the cd. Then you can check the CD from a floppy boot with no harddrive in sight. Sorry this is disorganized but I'm in a rush to catch up here. Good luck Spots

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next