Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Spots who wrote (5765)	1/31/1999 7:54:00 PM
From: Zeuspaul	Read Replies (1) of 14778

CAS2 maybe, on CAS3 memory (or are you running 66mhz memory Actually the other way around. I have CAS2 PC100 Mushkin/Samsung memory at CAS3 speed. Should I change it to CAS2? More likely, though, you need to up the voltage a trifle. Have you tried 2.1v? No but the problem occurs at 300/66 and 2.0 volts. I usually undo the overclock when installing and experimenting. 1) my daughter's (now dead) pc, an AMD 100mhz 486 clone. Would only boot Win 95 the way you say - step through the boot confirming each entry. The machine boots normally when turned on. It also boots normally with a shut down and restart. So far the problem is only when I change a video setting and it wants to reboot. Zeuspaul

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next