Dream Machine ( Build your own PC ) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Dream Machine ( Build your own PC )

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Spots who wrote (6037)	2/7/1999 2:41:00 AM
From: Zeuspaul	Read Replies (2) of 14778

summer place, fitted out sparsely, maybe, but fitted out. It looks like I will be spending my summer in a cottage in Win95 land!<g> Partition Magic blew me away again! This time it took both drives down. I was doing a resize on the FAT32 drive and she froze again. Power off..power on..same old story. The drive with the corrupt partition boots BUT the NT drive..which was not involved with the operation would not boot. Well not exactly..NT would not boot but Win95 from the NT/Win95 combo would boot. Why?..missing file <winnt root> \system 32 \ntosk?nh? I once again reformatted with the Maxtor EZ drive utility as PM could not access the partition. This time I did it first time. I restored with Drive image and Win95 was up and running again. Next I restored the NT/Win95 combo. I restored the identical image earlier today and it worked. This time the restore executed without a problem but NT will not boot..same error message..missing file <winnt root> \system 32 \ntosk?nh? Well I wandered over to PowerQuest to check things out. Signed up for the forum so I could post (they get a D- for passwords..they gave me a zero that looks like an O between two letters and ditto with an I...I think they are testing me:) Anyhow there was a guy asking questions about a Maxtor drive that had a similar problem...only kinda similar. His drive was 4 gig and change. Also had a freeze and had to reboot and lost a partition. There was no response yet (I did not note the date of the post). I posted my experience. Then I checked the downloads. They have three 4.0 to 4.01 patches for PM. One each for NT, DOS and Win95/98. Two are 3 meg and one is 3.5 meg. I could not find any release notes on the site. After downloading 9.5 MB of files I checked out the readme file. No release notes there either..just install notes. It may be a conspiracy between PM, Maxtor and NT <g> Am I paranoid?? This time when I was in the EZ Maxtor utility I found something new. Push F1 if you are installing NT. OK, why not, that's my plan even if I install Win95 first. The message is my drives are not jumpered correctly for NT. Not a problem for Win95 but NT wants standard jumpers so Maxtor suggests rejumpering my drives to a standard configuration. Standard jumpers?? This is the Maxtor drive utility used on Maxtor drives. There is only one option. Master/single for the first drive and slave for the second. The jumper is either on or off. My only other jumper option is to put the drives on separate channels and make them both master or other. So is it Maxtor? NT? or PM? combination or all three?? I could always drop another three hundred bucks and pick up an IBM 7200 RPM 14 gigger like Sean has and jumper it master and use the Maxtor as slave just for fun..what the heck, I am on vacation in Dream land so why not?<g> Zeuspaul

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next