SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Jim McMannis who wrote (50942)2/25/1999 10:56:00 AM
From: Elmer  Read Replies (1) of 1571762
 
Re: "When you bump a P-II from 450 to 500 you put stress on all your peripherals since you run them out of spec. This because you can no longer run at 100 Mhz bus/3=33MHz PCI. "

When you overclock a CeleronA from 300 to 450Mhz by increasing the bus speed from 66 to 100Mhz, the components remain in spec, assuming you bought 100Mhz SDRAM. I'll bet you already knew that.

EP
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News