Neomagic Corp. (NMGC) Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Neomagic Corp. (NMGC)

NMGC 0.0149

0.0%

Feb 2 1:02 PM EST

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Chinacat who wrote (2675)	3/4/1999 2:02:00 PM
From: A. Wayne	Read Replies (1) of 3645

It all depends on how much you want to enlarge a picture using the film. You cut the pixels in half every time to double the size of a print. If you have a 35mm color slide or negative (which is 1.5x1 inches)scanned at 2700 dpi, and make a 3x2 print you cut the dpi in half (equilalent to cutting the 20megs to 10 megs). Then double it to 6x4 print and you're already at 5meg or 675dpi. You can keep doubling the size until you get to about 200dpi, for a still not too grainy looking picture. If you want to make good sized enlargements, you really need that high film grain. This is why film is still much better than digital, at this time. Wayne

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next