Houston Lake Mining [HLM-ASE] Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Gold/Mining/Energy : Houston Lake Mining [HLM-ASE]

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: WWS who wrote (127)	3/11/1999 7:22:00 AM
From: DRT	Read Replies (2) of 364

FYI. Update: 1. Drill core from 3 holes has been sent for assaying... - 1 new hole was drilled 5 metres from the old #9 of the prospector's program (previously returned significant values of 1.68g/t PGM's over a true width of 13.6m at a vertical depth of 30.5 m, including 2.74 g/t over 5.2 m and 4.53 g/t over 1.5 m). - The 2 other holes are from the prospectors original drill program (Holes #6 and #7). From a visual standpoint, the core from these two holes is similiar to #9 (new and old), but previous assay results are not known to the company or the prospectors. - All three holes are along strike and the target zone is open in all directions. 2. The core from holes (#12-13) of the prospector's original program will be split and are scheduled to be sent to the lab for assaying by this weekend. They are approximately 200 metres NW of Hole #9. The geology in this area might be a little different than #9, with a Lower Zone/Middle Zone/Upper Zone. Comment: One thing is for certain, assaying of 6,7, 12 and 13 is warranted! DRT

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next