SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Scumbria who wrote (52873)3/18/1999 6:56:00 PM
From: Cirruslvr  Read Replies (1) of 1578929
 
Summary of AMD at CeBit

"AMD

AMD showed several K6-2 and K6-III machines on the floor
and had a special exhibit in a caboose on top of their booth
where they ran Winbench on equally configured PIII/500
against a K6-III/450, where the K6-III visibly led the race.
Nothing really new but nicely demonstrated and the polish
computer traders I slipped in with were duely impressed.

The cherry on top of course was the K7 system that ran on the
table beside that, it was clocked at 600 MHz and showed first
that it would run the Winbench itself without stability
problems and visibly a good deal faster than the other two
machines.

As a second sample a demo of Viper Racing ran on this K7,
which worked together with a Voodoo3-2000 for display,
which worked just fine as well, no frame rate display though.

Finally AMD gave me some information on the K7 and board
used, which I took a picture of to be seen here tomorrow. The
K7 will initially ship in the second quarter, at speeds in excess
of 500 MHz
and with 512 kB to 8 MB of L2 backside cache,
clocked from 1/3 to full CPU speed, depending on your
budget and needs.

The demo K7 ran on a reference design board with their own
AMD chipset."

fullon3d.com

The article kind of hints that the AMD display was public, but doesn't say outright. I emailed the author of the article to find out.
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext