SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Pastimes : Dream Machine ( Build your own PC )

 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: mowa who wrote (7043)4/14/1999 12:10:00 PM
From: Clarence Dodge  Read Replies (1) of 14778
 
Mowa

What do you mean by "hot-swappable

Zp's assumptions about drive lettering sound correct. I am able to remove one of two identically configured and matched (two of same drive maker, model, size) IDE drives, with the computer running, and the drive letter stays the same. I'm using Dataports (not DataStors). I don't know if these are different as far as hot-swapping goes. When I was researching removable trays it was a little confusing as to which systems where hot-swappable and which were not or if they all were. One of the things that tipped my scales toward the DataPorts was that they came right out and said, in plain English, that their units were hotswappable.

I was under the impression that I would need a special (IDE) controller to actually add/remove drives while the computer was running.

No don't need anything other than your regular IDE controller. Just make sure the drive activity light is not on and wait an extra minute after that to turn off the power switch on your frame and pull out the cartridge and drive.

thinking that powering on the drive while running may injure the drive, yes/no?

Computer running no. Drive running yes..injury definite. The drive must not be accessing data when you turn off its power. Turning on drive power when computer is running is ok. Again this is how the DataPorts work and I would assume others also but I don't know this as fact.

Maybe reviewing the DataStor docs and web site would either confirm or negate similarities with DataPorts.

Clarence


Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext