has anyone done the updates to CyberTrader 1.7 that were announced and emailed out on Friday?
The Port Assignments look confusing to me. Especially Step 1 (#8.):
"8. Change the ports to Island 26, Attain026 and Select Net@26"
hmmmmm... Strange 26, 026 and @26. I've never seen port assignments that looked this way...
See below:
If anyone knows if this is absolutely correct, I'd like to hear from you. I don't like surprises Monday morning.
thanks in advance
Fred Martin
________________________________________________________
Step 1: ECN Books
1. Log on to CyBerTrader
2. Locate the ECN Book window
3. Double Click in the ECN book, this will open the file and options
drop down menu on the top of the ECN Book
4. Click file
5. Click disconnect
6. Then click file again, then connect
7. Change the Island IP , Attain IP, and SelectNet IP addresses to
208.232.141.52
8. Change the ports to Island 26, Attain026 and Select Net@26
9. Click connect
10. You are now connected.
11. Don't forget to Save you settings!
12. Double click in the ECN book, click file, then save
*****If you do not have the the ECN Book open, on the main CyBerTrader
statistics bar, click options, start, ECN Books, go back to step 2
Step 2: Open/Executed Island Orders
1. Log on to CyBerTrader
2. Locate the Open/Executed Island Orders window
3. Double Click in Open/Executed Island Orders, this will open the
file and options drop down menu
4. Click file
5. click disconnect
6. Then click file again, then connect
7. change the IP address to 208.232.141.52
8. change the port to 2026
9. click connect
10. You are now connected.
11. Don't forget to Save you settings!
12. Double click in the either Open or Executed Island orders windows,
click file, then save .
*****If you do not have the the Open/Executed Island Orders open, on the
main CyBerTrader statistics bar, click options, start, Island orders, go
back to step 2
If you have any questions on downloading please contact Trader /Technical Support.
|
