Formerly About Advanced Micro Devices Message Board

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next

To: Gary Ng who wrote (58322)	5/16/1999 10:33:00 PM
From: Paul Engel	Read Replies (5) of 1583971

Gary - Re: "talking about voltage, what would be the voltage used in K7 " Good question. I would assume this will be at least 2.4 volts , where at 500 MHz, the K7 should dissipate over 60 Watts - as per "intelligent estimates" ! Personally, I expect AMD to actually use 2.5 volts on their 550 or 600 MHz parts - which will be 100% burned in for Oxide Break Down - prior to shipments. You may note that Anand, in his 550 MHz Pentium /// benchmark tests, verified that Intel uses only 2.0 volts to achieve 550 MHz on this 0.25 micron product ! Paul

Report TOU Violation

Share This Post

Public Reply Prvt Reply Mark as Last Read File

Previous 10 Next 10 Previous Next