SI
SI
discoversearch

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor.  We ask that you disable ad blocking while on Silicon Investor in the best interests of our community.  If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.
Politics : Formerly About Advanced Micro Devices
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  
To: Gary Ng who wrote (58344)5/17/1999 12:35:00 AM
From: Paul Engel  Read Replies (2) of 1576485
 
Gary - Re: "What is the number for Dixon and Coppermine ?"

Right now, Dixon is spec'ed at 366 MMHz on a 0.25 micron process and at 1.6 volts dissipates in the neighborhood of 8 or 9 watts.

Coppermine will run at about 1.6 volts, and - ignoring the on-chip L2 cache - should dissipate 36% less power at the SAME FREQUENCY as a Pentium ///.

Of course, the Coppermine will be able to run at 600 MHz at the time of introduction.

Paul
Report TOU ViolationShare This Post
 Public ReplyPrvt ReplyMark as Last ReadFilePrevious 10Next 10PreviousNext  

HomeMailHotSubjectMarksPeopleMarksKeepersSettings
Terms Of UseContact UsCopyright/IP PolicyPrivacy PolicyAbout UsFAQAdvertise on SI
© 2025 Knight Sac Media.  Data provided by Twelve Data, Alpha Vantage, and CityFALCON News