Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Strategies & Market Trends : TA-Quotes Plus -- Ignore unavailable to you. Want to Upgrade?

To: Bob Jagow who wrote (9719)	6/27/1999 10:29:00 PM
From: INVESTOR	Respond to of 11149

No, I don't own it. I just happened to check a daily split list that is available at quote.com and noticed that a split was listed for 6/25 that was not in the qp database and so I decided to make the fix. I never had this problem happen before and am not sure what caused it. I entered the .1667/1 split in the split maintenance window..clicked ok..and got the error message and the abort...with no means to correct the problem on my own. If the split requires a graph discontinuity to work...perhaps they should add this screen to the program. In any case.. Perhaps their best fix would be to delete the ticker.. and add it in again since the ticker name just changed as well to txlid. Thanks for your response. Investor0329

To: Bob Jagow who wrote (9719)	6/28/1999 1:50:00 PM
From: shasta23	Read Replies (1) \| Respond to of 11149

HI BOB! Ran a simple scan... input="fast.lst"; output="adxtrend.lst"; set adx=13; if adx(0)>35 then println Symbol; endif; and got the following (partial list) ADLAC,66.6875,50 ADPT,34.625,41 ADRX,73.875,89 ADTN,33.875,44 ADVNB,13.6875,40 AMCC,70.875,56 AMES,44.25,42 AMKR,7.5625,46 ANCR,24,63 ANDW,17.9375,52 ANIC,10.5,40 APCC,20.875,36 ASBC,43.0625,42 ASDV,17.0625,46 ASFC,43,40 ASML,55.75,51 ASPT,9.5625,49 ATHM,51.5,59 ATHY,12.5,47 ATML,23.8125,43 ATVI,13.6875,51 AVNT,13,41 This looks OK, since all the ADX values are above 35. BUT when i look at the charts themselves then ADX(yes it's set to 13periods too)gives me completely different values...like ADLAC adx=29 instead of 50 adpt adx=33 instead of 41 given in the list above. exporting to MSWIN displays for ADLAC a value of 31 for adx=13. Any idea what could be wrong and it would interest me if someone else sees the same discrepancy when scanning for ADX values? Any help would be appreciated! BTW does someone know and internet based free charting program that allows using ADX?? Thanks! STEFAN