Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Politics : Formerly About Advanced Micro Devices -- Ignore unavailable to you. Want to Upgrade?

To: FJB who wrote (67455)	8/3/1999 3:52:00 AM
From: Tenchusatsu	Respond to of 1574541

<No, that is not the case. You can buy 32MB DIMMs with four 64Mb chips on them.> You're right. Thanks for the correction. I originally thought that all SDRAM chips were 8 bits wide, and thus you need eight of them to make a full 64-bit data path. But apparently, there are also 16-bit and 32-bit SDRAM chips out there. They allow for four-chip and two-chip configurations, respectively. Still, because the number of bits must add up to 64, SDRAM requires a higher pin count than DRDRAM. Two DRDRAM chips can still sit on one 16-bit channel, while two 32-bit SDRAM chips must sit on a 64-bit channel. In this respect, DRDRAM is still preferable over SDRAM when it comes to the PCOAC architecture of Timna. (DDR SDRAM adds even more pins over regular SDRAM because of electrical concerns.) Tenchusatsu