Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Pastimes : Don't Ask Rambi -- Ignore unavailable to you. Want to Upgrade?

To: Rambi who wrote (34480)	8/9/1999 3:00:00 PM
From: ZinMaster	Read Replies (1) \| Respond to of 71178

> BUt these are in perfect condition... You could dye/ink them with a magic marker. I have used big Sharpie(tm) markers by cutting them open and using the big wick inside to paint the surface. It is very messy, though. Wear rubber gloves. Here's another way that might be a little better: 1) test a spot to see if acetone attacks the plastic. If it doesn't then continue. 2) get some black dye. 3) dissolve the dye in acetone instead of the usual hot water. Use only a few ounces of acetone. Do this outdoors, preferably on a cool day. Yes, I know the next cool day in Dallas is scheduled for December. 4) strip naked except for rubber gloves 5) liberally wet the plastic with the dye solution 6) wait a little while and repeat... 6.5) for optional artistic merit, sit in the chair at this time. 7) hose it all off and see if it worked. Let it sit around for a day or two then check it for colorfastness. With time the dye will fade more than a pigmented paint would. On the other hand, it won't fall off like a paint.

To: Rambi who wrote (34480)	8/9/1999 5:49:00 PM
From: Justin C	Read Replies (1) \| Respond to of 71178

Sherwin-Williams paint stores are usually pretty good about coming up with kind of paint you need. I rummaged around in the garage and found an old spray can of S-W Appliance Epoxy Spray Enamel. I sprayed a plastic water bottle and the paint appears to have adhered very well. On the can it says "... for use on metal, solvent resistant plastics, wood ... and children's playthings." It's usually a good idea to test the paint in an area that doesn't show to be sure it works okay.