Silicon Investor (SI) -- The First Internet Community

STOCKTALK

We've detected that you're using an ad content blocking browser plug-in or feature. Ads provide a critical source of revenue to the continued operation of Silicon Investor. We ask that you disable ad blocking while on Silicon Investor in the best interests of our community. If you are not using an ad blocker but are still receiving this message, make sure your browser's tracking protection is set to the 'standard' level.

Technology Stocks : Lithium Technology - LITH -- Ignore unavailable to you. Want to Upgrade?

To: jim heger who wrote (147)	9/25/1999 7:20:00 AM
From: tony schwarz	Respond to of 215

(COMTEX) B: Lithium Tech hopes for NASA nod B: Lithium Tech hopes for NASA nod Sep. 24, 1999 (Electronic Buyers News - CMP via COMTEX) -- Lithium Technology Corp., Plymouth Meeting, Pa., has received favorable initial test results from NASA Glenn Research Center, Cleveland, on its 8.5-A-h lithium-ion polymer cells. LTC shipped 20 of these cells to NASA Glenn in March. After four months in storage at NASA's facility, 17 of the 19 cells passed preliminary tests. The two cells that didn't pass would still function in portable electronics applications, the company said. -0- Copyright 1999 CMP Media Inc. * end of story *

To: jim heger who wrote (147)	10/4/1999 10:53:00 PM
From: Javelyn Bjoli	Read Replies (1) \| Respond to of 215

EE Times, October 04, 1999 Li-ion cells dial up size reduction for portable phones Yoshiko Hara TOKYO - Demand for miniaturized components among portable-phone makers has moved the front lines of competition in the rechargeable battery market to cells under 4 mm thick. To get there, vendors are marshaling novel lithium-ion structures, most based on a polymer gel electrolyte. Sanyo and Toshiba-the latter via a nonpolymer technology and a joint venture with Asahi Glass Corp.-are the latest vendors to join the charge to Li-ion batteries measuring less than 4 mm. Sony and Matsushita spearheaded the drive in January with separate introductions tapping polymer electrolyte technology. Sanyo Electric Co. Ltd.'s entry, debuting this month, is a 3.8-mm-thick card-shaped product that takes the polymer route. Toshiba Battery Co. Ltd., meanwhile, has tweaked conventional Li-ion technology to yield a battery measuring 3.6 mm thick, previously the exclusive domain of polymer electrolyte-based offerings. Joint venture A&T Battery intends to ramp production of the cells to 1 million per month early next year. Battery capacity typically decreases proportionally with thickness, whereas phone manufacturers are calling for continual increases in capacity. Sanyo claims to have cleared the technical hurdle by devising a gel material that dissolves the electrolyte uniformly, thus reducing the required volume of polymer and maximizing performance. Sanyo's battery uses the same electrode combination-lithium oxide cobalt and carbon-as conventional lithium-ion batteries. Full capacity is 570 mA-hr at 20 degrees C; about 50 percent of full capacity is retained at -20 degrees C, marking an improvement in polymer batteries' traditionally marginal low-temperature performance, according to Satoru Fukunaga, Sanyo Energy's battery division manager. The battery measures 3.6 x 35 x 62 mm. The discharge voltage is 3.7 V, volumetric energy density is 270 Wh/liter and gravimetric energy density is 156 Wh/kg. The Toshiba approach sticks with a liquid electrolyte but, like the polymer approaches, employs a laminate film in place of the metal exterior packages used for conventional lithium-ion batteries. The cell's electrodes are lithium oxide cobalt and carbon. A spokesman said Toshiba managed to get the battery thickness under 4 mm, and to ensure high reliability and safety ,by optimizing the electrode materials and improving the electrolyte liquid. He said the battery's low-temperature performance-40 percent of full capacity at -20 degrees C-exceeds that of conventional lithium-ion batteries, which he said can drop to 24 percent of full capacity at -20 degrees C. The battery measures 3.6 x 35 x 62 mm and weighs in at 13 grams. Capacity is rated at 540 mA-hr with a discharge voltage of 3.8 V. Volumetric energy density is 290 Wh/liter; gravimetric energy density is 160 Wh/kg. The card-size batteries introduced by Matsushita and Sony in January respectively measure 3.6 and 3.8 mm thick. The other dimensions are the standard card-sized 35 x 62 mm. Matsushita expects to achieve monthly production of 1 million units this fall and Sony next spring.