News November 1, 06:23 Eastern Time
Mitsubishi Samples 0.18-um, 256-Mbit PC266 DDR and PC133 SDRAMs That Use a Single-Die Design with Metal Mask Option
SUNNYVALE, Calif., Nov 1, 1999 (BUSINESS WIRE) -- Manufacturing
Efficiency, JEDEC-Standard Compliance, and an Easy Transition Path from
SDRAM Provide DDR SDRAM with a Major Step Toward
Its Eventual Adoption in Mainstream DRAM Applications
Mitsubishi Electronics America's Electronic Device Group today
announced sample availability of 256-Mbit PC266 double data rate (DDR)
and PC133 conventional synchronous dynamic random-access memories
(SDRAMs) that are manufactured in a 0.18-um CMOS process technology.
Mitsubishi uses a single-die design and manufacturing process for both
memory types, with a metal mask option to differentiate the DDR SDRAM
from the PC133 SDRAM near the end of the manufacturing process. The
resulting manufacturing efficiency plus JEDEC-standard compliance and
an easy transition path from conventional SDRAM provide a major step
toward the adoption of DDR SDRAM as the leading main-memory alternative
for high-end computing applications. This approach also helps establish
the viability for eventual use of DDR SDRAM in mainstream PCs.
"Mitsubishi's single-die manufacturing approach increases manufacturing
efficiency, speeds time-to-market, and reduces long-term system
development costs for server and workstation developers who need the
dramatic performance boost available from DDR SDRAM, and developers who
want to use PC133 SDRAM for next-generation personal computers of all
types," said Cecil Conkle, assistant vice president of DRAM marketing
at Mitsubishi Electronics America Inc. "However, both sets of customers
also want the assurance of an easy migration path upward from
conventional PC100 SDRAM, compliance to JEDEC standards, and the
assurance of third-party chipset support, which both DDR SDRAM and
PC133 SDRAM provide."
"Following the successful launch of PC133 SDRAM, Reliance is now
focused 100 percent on enabling DDR SDRAM for future ServerSet(tm)
developments," said David Pulling, vice president of marketing at
Reliance Computer Corporation. "DDR SDRAM is the ideal memory to
implement and achieve all the future Server RAS requirements being
driven by the boom in eCommerce. Furthermore, DDR SDRAM is the de facto
server memory of choice for the industry's leading server OEMs,
including Compaq, Dell, Hewlett-Packard, IBM, NEC, Siemens, and Sun
Microsystems. Mitsubishi's new 256-Mbit products in both PC133 and DDR
SDRAM versions complement our chipsets to provide high-speed memory
solutions to our customers."
"In the past six months, customers who build high-end systems, such as
servers and workstations, have become increasingly vocal about their
planned use of DDR SDRAM technology," said Victor de Dios, president of
de Dios & Associates, a market research firm specializing in DRAMs.
"They view DDR SDRAM as a solid, emerging segment of the mainstream
DRAM market. DDR SDRAM appears to be on a pace to achieve more than 20
percent of the worldwide DRAM market by the fourth quarter of 2000.
PC133 SDRAM has also gained significant market momentum during the past
several months as an easy transition from PC100 SDRAM for main memory
in mainstream personal computers."
"DDR SDRAM and PC133 SDRAM are JEDEC-standard memories, and Mitsubishi
has been a significant player in the development of those standards,"
said Desi Rhoden, chief executive officer and president of Advanced
Memory International Inc., an organization focused on the
infrastructure coordination of JEDEC-standard memories. "Mitsubishi's
single-die approach for DDR SDRAM and PC133 SDRAM indicates how easily
DDR can become the next step for mainstream DRAM in high-end computing
market segments that require up to 2.1 Gbytes per second of bandwidth.
The ease of transition from PC100 to PC133 to DDR SDRAM reduces cost
and simplifies the system design direction for both DRAM manufacturers
and customers."
Mitsubishi's DDR SDRAM Meets PC266 Requirements
Mitsubishi's 256-Mbit DDR SDRAM can achieve a peak data transfer rate
of 2.1 Gbytes per second at a clock frequency of 133 MHz -- or 266
Mbits per second per data pin -- when used with a 64-bit bus. It
attains approximately twice the speed of standard SDRAM and meets PC266
system requirements with the same die size as for conventional SDRAM.
The device achieves its peak data transfer rate as a result of the
synchronization of data input and output with the rising and the
falling edges of each clock cycle, as well as through using a
bidirectional data strobe that is synchronized to the source of each
high-speed signal used. Other key reasons the DDR SDRAM achieves a
higher speed are because it has four banks of data storage cells that
have independent, simultaneous operation, and because it uses the
JEDEC-standard stub series terminated logic for 2.5 volts (SSTL_2)
interface, which typically features half the voltage swing of the
low-voltage transistor-to-transistor logic (LVTTL) interface used in
conventional SDRAM.
Mitsubishi's 256-Mbit DDR SDRAM is available in 64-megaword x 4-bit
(64M x 4) and 32M x 8 configurations (M2S56D20TP and M2S56D30TP,
respectively), and supports column address strobe latencies (CL) of CL
1.5, CL 2, or CL 2.5 with sequential or interleaved data bursts in
lengths of 2, 4, or 8 bits for each data pin. The data refresh rate is
8 Kcycles per 64 ms. The x4 configuration is particularly well suited
for server, workstation, networking, and communications system
applications that require system-level error correction code (ECC)
detection and correction with "chip-kill" protection.
The device offers 2.5-volt operation for low power dissipation, and
also features an extended mode register with delay lock loop (DLL)
disable, driveability strength change, and /QFC enable for optimizaton
of module and system design.
PC133 SDRAM for Next-Generation PCs
Mitsubishi's 0.18-um, 256-Mbit PC133 SDRAM is targeted for
next-generation PCs and other systems that are designed to operate with
a 133-MHz memory bus. It is available in 64M x 4, 32M x 8, and 16M x 16
configurations (M2V56S20TP, M2V56S30TP, and M2V56S40TP, respectively);
supports CL 2 or CL 3 with sequential or interleaved data bursts in
lengths of 2, 4, or 8 bits for each data pin; and operates at 3.3
volts. The data refresh rate is 8 Kcycles per 64 ms.
Packaging, Availability and Pricing
Mitsubishi's 256-Mbit DDR SDRAM is available in a JEDEC-standard,
400-mil, 66-pin, thin small outline package, type II (TSOP II), with a
0.65-mm pin pitch. Mitsubishi's PC133 SDRAM is available in a
JEDEC-standard, 400-mil, 54-pin TSOP II package with a 0.8-mm pin
pitch.
Mitsubishi's 256-Mbit DDR and PC133 SDRAMs will be available in
February 2000 and November 1999, respectively. Initial volume
production for both products is scheduled for April 2000 with large
volume production expected by the middle of 2000.
Sample pricing for the 256-Mbit DDR SDRAM is $380.95 each for PC266
versions and $285.71 each for PC200 versions. Sample pricing for the
256-Mbit PC133 SDRAM is $257.14 each for PC133 versions and $238.09
each for PC100 versions.
About Mitsubishi Electric and Mitsubishi Electronics America Inc.
Mitsubishi Electric Corporation is one of the world's top-10 DRAM
suppliers and aggressively develops advanced DRAMs, such as PC100,
PC133, and DDR SDRAM, RDRAM(r), and other emerging industry-standard
DRAM types to support current and future customer requirements.
Mitsubishi Electric is the first company to successfully integrate the
process technologies of DRAM and processor logic with its highly
acclaimed eRAM(tm) system integration technology, and has shipped
embedded DRAM products in high volume for longer than any other
supplier. eRAM is Mitsubishi Electric's brand name for its silicon
process technology, products, and systems expertise that integrate
memory and system-level core functions on the same integrated circuit
to enable unprecedented overall system performance.
A top-tier semiconductor supplier, Mitsubishi Electric markets memory
products and an extensive range of other semiconductors in North
America through the Electronic Device Group of Mitsubishi Electronics
America, Inc. Additional information on the Mitsubishi Electric
Semiconductor Group is available at mitsubishichips.com.
Trademark Information
eRAM is a trademark of Mitsubishi Electronics America Inc. ServerSet
is a trademark of Reliance Computer Corporation. RDRAM is a registered
trademark of Rambus Inc. All other companies and products referenced
herein are trademarks or registered trademarks of their respective
holders.
Keywords
Mitsubishi, DDR, SDRAM, DDR SDRAM, PC266, PC133, Synchronous DRAM,
DRAM.
Copyright (C) 1999 Business Wire. All rights reserved.
Distributed via COMTEX.
|
